4425 SW 27th Terr.
Topeka, KS 66614

Running Toilet: The Silent Culprit Behind Water Waste

It’s a sound many of us are familiar with – the continuous trickle of water in the toilet long after flushing. Often ignored or put off for another day’s task, a running toilet is more than just a minor annoyance. Did you know that a toilet that keeps running after being flushed can waste up to 200 gallons of water daily? That’s a staggering amount, both in terms of environmental impact and your water bill.

Understanding the Issue

A running toilet happens when the internal mechanisms don’t function correctly, causing water to flow continuously from the tank into the bowl. This can be due to a variety of reasons:

  • The flapper valve in the tank might not be sealing properly.
  • The float might be set too high, causing water to flow over the top of the overflow tube.
  • The refill tube might be improperly positioned.

Why It Matters

The implications of a running toilet extend beyond the annoyance of a constant dripping sound:

  • Environmental Impact: Freshwater is a precious resource. Wasting it unnecessarily adds to the growing concerns of water scarcity.
  • Financial Cost: A silent leak can become a costly issue, with hundreds of gallons wasted each day, significantly increasing your water bill.
  • Home Damage Risk: Over time, a running toilet can also cause wear and lead to other plumbing issues, potentially resulting in more severe damage to your home.

DIY Fixes

Before you call a plumber, there are a few simple things you can check:

  1. Inspect the Flapper: This is often the culprit. If it’s worn out or warped, it won’t seal properly, allowing water to leak from the tank into the bowl. Replacing a flapper is a simple and inexpensive task.
  2. Adjust the Float: If the float is set too high, the tank overfills, and water spills into the overflow tube. Adjusting it to the correct level can solve the problem.
  3. Reposition the Refill Tube: Ensure the refill tube isn’t inserted too far into the overflow tube, as it can siphon water continuously.
  4. Check the Fill Valve: If adjusting the float doesn’t fix the issue, the fill valve might need to be repaired or replaced.

    When to Call a Professional

    If you’ve tried these fixes and your toilet is still running, it might be time to call a professional. Complex issues, such as problems with the flush valve assembly or a corroded toilet handle, may require the expertise of a plumber.

    Preventive Measures

    Preventing future issues can save you time and money:

    • Regularly check the components of your toilet.
    • Consider installing a new toilet if yours is old. Newer models are more efficient and less prone to problems.
    • Be proactive with maintenance. A quick check now can prevent a bigger problem later.

    A running toilet is a common issue in many households, but it’s not one to be ignored. Addressing it promptly can save water, reduce your bills, and prevent future plumbing headaches. Remember, every drop counts when it comes to water conservation. If you’re unsure about tackling the issue yourself, don’t hesitate to call a plumbing professional.

    Need Help?

    At Preferred Plumbing, we’re committed to helping you maintain an efficient and leak-free home. Contact us for any plumbing needs in Topeka Kansas.

    Related Articles

    Preparing Your Plumbing For Summer: A Handy Checklist

    Preparing Your Plumbing For Summer: A Handy Checklist

    As summer approaches and the temperature rises, homeowners often think about preparing their homes for the heat, perhaps by installing air conditioning units, servicing their fans, or even getting the pool ready for those lazy afternoon dips. However, your home's...

    CALL US TODAY FOR FAST SERVICE

    (785) 506-4898